Description
Max Lumen: 2000 Lumens
Max Run Time: 21.25 Hours
Battery: 3.7V 2000mAh or 4 AAA
Model: XP1105v2
Technical Specs:
Lumens: 57 - 2040
Run Time: 1H 30M - 25.25H
Beam Distance: 17m - 106m
Battery Count/Size: 3.7V 2000mAh or 4 AAA
Width: 1.69 in.
Length: 1.69 in.
Height: 8.06 in.
Weight: 0.48 lbs.
Product Information
Rechargeable Flashlight with Power Bank – Compact Strength for Every Challenge
The LUXPRO XP1105v2 is built to keep you moving with reliable light and backup power when it matters most. With brightness reaching up to 2,000 lumens, it delivers the visibility you need—whether you’re tackling tough jobs, heading outdoors, or preparing for the unexpected.
This rechargeable flashlight adapts to any task with multiple light modes and extended run times, giving you the freedom to work longer and explore further. And when your devices run low, the built-in power bank ensures you can recharge and stay connected, no matter where you are.
Rugged, comfortable to hold, and designed for performance—the XP1105V2 is more than a flashlight. It’s the tool you can count on when the lights go out and the work carries on.
Operation Instructions
On/Off: Press and release on/off button.
SMART Modes (High/Med/Ultra Low): Press the on/off button within 5 seconds of turning the light on to cycle through modes. After 5 sec. the next button press will be off.
Cycle Modes (High/Med/Ultra-Low): While button is illuminated, press to change modes.
Power Bank Port: 5V Output, 1A Max. Press button to activate battery indicator. Blue LED +30%, Red LED -30%. Battery indicator will automatically turn off.
Charging Instructions
To charge the flashlight, locate the USB dust cover on the opposite side of the on/off button on the back of the light. Lift the cover to expose the charging and power bank port. Plug the smaller end of the supplied USB-C cable into the charging port. Plug the opposite end of the cable into a USB power source. The battery indicator LED will turn on; RED to indicate the light is charging, then change to BLUE once the light is fully charged.
Charge Time: 4.5 Hours
Using 4 AAA Batteries
-
Unscrew the tailcap of the flashlight and remove the rechargeable battery.
-
Insert 4 AAA batteries into the provided battery holder. Make sure the arrow on the holder is pointing downward as you slide it into the flashlight.
-
Screw the tailcap back on securely—your flashlight is now ready to use.
For best performance, always use fresh alkaline batteries of the same brand and voltage. If you plan to store the flashlight for an extended period, remove all batteries and keep the flashlight in a dry, protected place.
Performance Specs
Warranty Information
The XP1105v2 has a Limited Lifetime Warranty Against Manufacturer’s Defects.
To submit a warranty claim, please visit our Warranty Page.
